PriceList for Nc Cutter Machine - Single Facer Laminating Smart Line – GOJON

Feature

* Work with both offset and preprinted paper, there is no need to replace any machine each other, reduce the cost obviously.

* Both PVA and starch glue can be used in the laminating

* Cassette single facer is equipped with electrical trolley, quick changing corrugated rolls.

* High speed splicer, non-stop splicing, less waste

* Non-stop changing order system for the top sheet stack 

* corrugated cardboard Humidification system, flatten board, adjusting humidity

* corrugated cardboard trimming, automatic waste discharge.

* Servo synchronous cutting machine, color detection, accurate positioning of fixed length.

* Servo motor high speed laminator, automatic synchronous for top and bottom sheet.

* High speed stacker, automatic rotary stacker.

* Video monitoring on the main control panel, timely detection of equipment anomalies.

* Production management system, improve efficiency, increase production, reduce loss.

* Equipped with remote diagnosis system for machine maintenance.

Parameters

* The maximum effective width of cardboard:1650mm

* The minimum effective width of cardboard:600mm

* The maximum effective size of cardboard(length X width): 1650mmX 1650 mm

* The minimum effective size of cardboard(length X width): 500mm X 600 mm

* The maximum mechanical liner speed:150m/min

* The maximum laminating speed:12000P/h

* Single piece laminating Accuracy: ±1mm（front）、±0.5mm（side）

* Paper roll positioning crosscutting accuracy: ±1mm

* Maximum stacking speed :12000P/h（E Flute）10000P/h（B flute）

* Stacker height:1800mm（with pallet）

* Installed capacity:202kW

* Machine dimensions(Length X Width X Height):63000mmX5340mmX4530mm

* Machine required plant size(Length X Width X Height): 68000mmX10500mmX4530mm

Accessories Appendix